SHUTTER & GARAGE DOOR LOCKS

VIRO 3331 Oval Bullet Lock

OPERATION

• Sprung locking pin on top of cylinder barrel is depressed by a turn of the key, allowing the bullet to be inserted or withdrawn from the housing

FEATURES

• Key removable in locked position only

Cylinder Finish Brass Cylinder Diameter 22mm x 14mm (Oval) Pin Length 43mm & 53mm Overall Length 76mm & 86mm Housing diameter 41mm Housing Projection 35mm Keys Supplied 2 Keyed Alike Ex-stock Packed Quantity Loose

TESSI 6460 Oval Bullet Lock

OPERATION

• Sprung locking pin on top of cylinder barrel is depressed by a turn of the key, allowing the bullet to be inserted or withdrawn from the housing

FEATURES

• Available keyed alike in pairs comes with housings and 4 keys total, or bullets only keyed alike, any multiples (choice of 3 different key numbers)
• Key removable in locked position only

Cylinder Finish Nickel Plated Cylinder Diameter 20mm x 13mm (Oval) Pin Length 47mm Overall Length 90mm Housing Diameter 75mm x 35mm (Oval) Housing Projection 43mm Keys Supplied 2 Keyed Alike Ex-stock Packed Quantity 20

VIRO 8201 Central Shutter Lock

OPERATION

• Deadbolt is locked or unlocked by key from either side

Case Size 154mm x 59mm x 15mm Cylinder Projection 15mm Cylinder Finish Brass Bolt Projection 45mm Unlocked, 68mm Locked Keys Supplied 2 Outside, 1 Inside Packed Quantity 1 Handing Central - Bolt Shoots Both Sides

CISA 06302 Roller Shutter kit

OPERATION

• Kit comprises two hardened steel eyebolts and one brass retainer which is permanently anchored into the ground, flush with the surface. The threaded eyebolt is fastened permanently to the shutter section whilst the 'arrowhead' bolt is inserted into the retainer and secured with a 90 degree turn. When the shutter is in the closed position the two eyes can be secured together with an appropriate padlock

FEATURES

• Ground fixing 'arrowhead' bolt removable when shutter is in the open position
• Supplied with lockable brass dust cap

Eye-Bolt Finish Galvanised Retainer Finish Brass Bolt Lengths 25mm, 60mm Retainer Sizes 88mm x 43mm Diameter

HENDERSON 032092 Locking Garage Door Handle

OPERATION

• Handle deadlocked by key

Finish Satin Aluminium Handle Size 102mm x 22mm Handle Projection 48mm Backplate 76mm x 43mm Bolt Centres 51mm Bolt Stump Projection 35mm Spindle Diamond 30mm x 8mm Dia Keys Supplied 2 Keyed Alike In-house Packed Quantity 1

CISA 06303 Tilting Door Kit

OPERATION

• Kit comprises hardened steel 'drop bolt' body which is bolted permanently to the foot of the door and brass retainer which is permanently anchored into the ground, flush with the surface. When the door is in the closed position the bolt is dropped into the retainer and secured with a 90 degree turn and fitting of an appropriate padlock

FEATURES

• Bolt can be locked 'open' or 'closed'
• Supplied with fixing bolts and lockable brass dust cap